Good evening cnc zone long time no see.

I have a massive amount of keyrings I need to print but I have to make them one at a time so I need a pressing jig made up if possible?


The jig will be larger than a4 so I can print my designs in a set layout in a4 and place over the top of the jig to produce 15 in one go.


Material and sizing.
Mdf sheet 9” x 12.5” depth not more than 1” (if possible)


15 milled out recesses to be spaced equally 20mm apart
Recesses need to be 3” wide x 1.5” high and 1.29mm deep


I passed on my cnc machine a long time ago so it’s Sod’s law I now need it.
Any help would be greatly appreciated.


Many thanks.
Paul.