Has anyone looked into converting their 770m or 1100m (without servos) to a BT30 spindle using Tormach's BT30 kit? This kit is intended for the 770m+ or 1100m+ servo mills but I wonder if it could be used on the 770. It looks like it comes with everything you would need to mechanically get a BT30 interface. So two questions - could the new BT30 spindle kit be installed without the servo kit and then be used with BT30 tooling? And to take it a step further, what else would be needed aside from the included encoder to enable rigid taping?
Link to kit: https://tormach.com/bundle-bt30-spin...70m-mills.html
Link to installation video: https://www.youtube.com/watch?v=q4JHbKKr_60