584,830 active members*
5,623 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Syil Products > Syil CNC SX3 spindle interface board
Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2015
    Posts
    3

    Syil CNC SX3 spindle interface board

    Hi all,

    I have a Syil SX3 cnc mill and am wondering if anyone come across a schematic for the spindle interface? board, the "cheater" board that feeds spindle driver board, switches modes from cnc to manual and controls appliance relays? I want to put together a complete set of drawings but can't seem to find this one. I have the schematics for the BOB, spindle driver w/daughter board (Thanks Neil) and the display board and it would be nice to complete the set!

    Thx, Dave

  2. #2
    Join Date
    Oct 2020
    Posts
    2

    Re: Syil CNC SX3 spindle interface board

    Hi Dave,
    Slightly off topic however
    Whatever you do do not go to Arceurotrade and admit that you have a Syil machine for spares. I burnt out a power board and the touch pad board when the depth gauge caused a short. As I could not find spares I decided to go over to Sieg boards. Arceurotrade knew I had a Syil machine from past correspondence and refused to sell them and cancelled my payment with no valid explanation. They do sell compatible parts of value just don't mention Syil. Answer was to go direct to China and buy direct from their supplier. The wait is inconvenient and they have lost any future trade from me!

  3. #3
    Join Date
    Oct 2020
    Posts
    2

    Re: Syil CNC SX3 spindle interface board

    Hi there to make amends for the rant.
    I have the drawing you require but it is too large to transfer. Shrunk down it is unreadable.
    Is there anyway to PM me.
    Bob

  4. #4
    Join Date
    Nov 2015
    Posts
    3

    Re: Syil CNC SX3 spindle interface board

    Thanks Bob, I'll PM you.
    Dave

  5. #5
    Join Date
    Nov 2015
    Posts
    3

    Re: Syil CNC SX3 spindle interface board

    Quote Originally Posted by BobFitch View Post
    Hi there to make amends for the rant.
    I have the drawing you require but it is too large to transfer. Shrunk down it is unreadable.
    Is there anyway to PM me.
    Bob
    Hi Bob, it appears your PM is set to off. If you enable it I will PM you about theSyil board schem.
    Dave

  6. #6
    Join Date
    May 2020
    Posts
    1

    Re: Syil CNC SX3 spindle interface board

    ik had ook graag een schema van een sx3
    [email protected]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •