584,865 active members*
5,004 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > CNC Machining Centers > Lowering hood on Buselatto Easy Jet 4.8
Results 1 to 1 of 1
  1. #1
    Join Date
    Oct 2020
    Posts
    1

    Lowering hood on Buselatto Easy Jet 4.8

    Hello everyone,

    I wanna start by apologizing for my lack of knowledge but I encountered an issue and, for the life of me, I have no idea how to fix it.

    I changed the aspirator hood to the highest position from my remote control and now I have no idea how to bring it back down. The button is apparently bi-directional but I don't know how to change it's function, atm it only goes upwards.
    Tried settings from the Wave software, selected the lowest position, it does nothing.
    Tried settings from Machine Panel, they're greyed out and unusable.

    Any suggestions would be greatly appreciated.
    I've attached a picture of the remote, the button in question that raised it in the first place is the blue one with vertical arrows.

    Thanks in advance.
    Attached Thumbnails Attached Thumbnails 122562126_3205121702949958_8504009766990925491_o.jpg  

Similar Threads

  1. Buselatto Cnc Router
    By mikedforme in forum CNC Machining Centers
    Replies: 0
    Last Post: 09-21-2019, 02:15 AM
  2. Raising and lowering the bed
    By rickwired in forum Laser Engraving / Cutting Machine General Topics
    Replies: 5
    Last Post: 06-17-2019, 10:56 PM
  3. Replies: 0
    Last Post: 12-10-2015, 04:06 AM
  4. Lowering V output.
    By alexhhisc in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 08-09-2012, 04:30 AM
  5. Lowering PS Voltage
    By id 10 t in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 12-13-2005, 08:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •