548,605 active members*
2,667 visitors online*
Register for free
IndustryArena Forum > CAM Software > Vectric > Any current Aspire users who are former Artcam users?
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2007

    Any current Aspire users who are former Artcam users?

    Hey Guys,

    I took a few years off of CNC projects to focus on building a new company. Now I'm stepping back into doing some creative CNC projects and tried to load Artcam onto my new workstation... low and behold, Artcam is no more. My projects are primarily artistically carved wood projects, and I used a bunch of Artcam tools, such as draping a 3D file created from a raster image, over an engineered shape. I found this much easier, than trying to use Solidworks to create an artistic surface. At any rate, I'm wondering if there are other folks out there who were heavy Artcam users, who are now using Aspire pro? If so, what limitations and improvements have you discovered in the switch? From first glance, they seem to be very similar in form and function. Thank you in advance!!!

  2. #2
    Join Date
    Jul 2017
    Why artcam no more?
    It break?

Similar Threads

  1. ArtCAM vs Aspire
    By turosan in forum ArtCam Pro
    Replies: 0
    Last Post: 01-22-2020, 02:51 PM
  2. Artcam users in Pretria South Africa
    By pietste in forum ArtCam Pro
    Replies: 0
    Last Post: 04-04-2014, 08:32 PM
  3. Replies: 2
    Last Post: 11-19-2013, 04:40 PM
    By jseiler in forum Vectric
    Replies: 0
    Last Post: 06-21-2011, 05:58 AM
  5. Replies: 30
    Last Post: 09-13-2008, 12:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts