[vmax549]

I ran into an interesting problem whjile updating from 2.3.6 to 2.6.0 . PathPilot will ONLY load up in demo mode. This is not a tormach machine and each time you update you have to go into the ini and hal files and update the info needed for it to run PathPilot . Otherwise you get the error screen and the option to reset pathpilot. BUT not this time around. I t always loads Demo mode. IT never shows the error screen at all and no option to reset PathPilot to a new config.

Has Tormach made PathPilot to ONLY be useable by a true Tormach Machine ???

(;-) TP

[vmax549]

NOW THAT WAS REALLY ODD. When I updated PathPilot and the PC rebooted it lost the ethernet port. (;-( I guess it is time for some new parts .

(;-) TP

[Nixxk]

I run pathpilot 2.6.0 on a machine that is not a Tormach .
Cant remember if it was 2.5 or 2.6 i did run into trouble where i could not get pathpilot to run.
So i just did a quick back up . reinstall PP 2.0 then got it upgraded to 2.6 . No issues since