584,862 active members*
5,954 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2020
    Posts
    2

    Mazak H400 M32 Variation at Y axis

    Hello, we have a problem with a horizontal mill Mazak H400 M32 control.
    When machining a circle, X axis machining is correct, meanwhile Y axis has 0.07 inches less of cut.
    Did someone know if i can modify a parameter to adjust this difference?
    Or by the other hand, some one has the parameter manual?

  2. #2
    Join Date
    Sep 2012
    Posts
    215

    Re: Mazak H400 M32 Variation at Y axis

    Quote Originally Posted by Meka1292 View Post
    Hello, we have a problem with a horizontal mill Mazak H400 M32 control.
    When machining a circle, X axis machining is correct, meanwhile Y axis has 0.07 inches less of cut.
    Did someone know if i can modify a parameter to adjust this difference?
    Or by the other hand, some one has the parameter manual?
    For that amount of variation i would be looking at a mechanical issue or maybe an encoder drive issue before trying to change backlash parameters
    Regards Bob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •