[pgoosen74]

Good evening

I purchased an ELE-1212 cnc router from Blue Elephant for my guitar shop. Being new to cnc machines and of course Mach3 I am having a hard time with settings. I modeled a simple 100mm x 100mm x 6mm deep slot in fusion 360 an uploaded the G-code file to Mach3. The machine moves and the spindle turns and I can see its goes through the motions however, the cut ends up only being around 16mm x 16mm x 1mm deep. I've tried calibrating the axis multiple time with no luck.

What am i doing wrong?

Any help would be much appreciated.

Thanks,

[ZASto]

I guess that your native units in Mach3 are set to INCHES and your G-code does not have G21 somewhere at the beginning of file, indicating that the code is in Metric units.

[elephantcnc]

I'm sorry for replying you so late. If your problem has not been solved or you want to know other technical support, please contact us. We will arrange professional after-sales personnel to answer your questions.
Contact Information:
https://www.elephant-cnc.com/
Email: [email protected]
Whatsapp/mobile: +86-15064026772