584,800 active members*
4,760 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Syil Products > Looking for pictures of Syil x5, x6, or x7 electrical panel
Results 1 to 4 of 4
  1. #1

    Looking for pictures of Syil x5, x6, or x7 electrical panel

    I recently picked up a used Syil X6 with a gutted electrical cabinet and I am looking for pictures of the inside of the electrical panel so I can see how Syil laid out the original cabinet. Thanks for your help.

  2. #2
    Join Date
    Oct 2008
    Posts
    2100
    They use different controls on some of the same machines, so a photo of the layout might only at best be generically helpful.

    Realistically if you're going to set up your own controls for it you just need to set up your own control layout for it.

    Once you figure out all the controls you're going to use set them on the table and look at them and look at the cabinet and decide where you would put them to make it the easiest to wire and route wiring.
    Bob La Londe
    http://www.YumaBassMan.com

  3. #3

    Re: Looking for pictures of Syil x5, x6, or x7 electrical panel

    Thanks for the reply, that is exactly what I ended up doing. Got it all wired and everything working except I am in need of a replace LCD screen. I have contacted Syil about a replacement but have yet to hear back from them.

  4. #4
    Join Date
    May 2022
    Posts
    3

    Re: Looking for pictures of Syil x5, x6, or x7 electrical panel

    Hi!

    I am having the same issue, I can figure out what is what in the back of my machine.
    Could you please take a picture so that I can see what is wrong with mine?

Similar Threads

  1. Electrical panel wiring for hybrid steppers
    By MattCCabs in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 05-15-2020, 06:06 AM
  2. Electrical Panel
    By kolias in forum Open Source CNC Machine Designs
    Replies: 40
    Last Post: 09-06-2013, 12:27 AM
  3. Replies: 3
    Last Post: 09-27-2011, 03:12 AM
  4. some pictures of syil machine compare
    By syil in forum News Announcements
    Replies: 2
    Last Post: 05-13-2010, 12:51 PM
  5. Electrical Panel & Router Wiring Diagrams
    By Santa Fe Al in forum CNC Machine Related Electronics
    Replies: 29
    Last Post: 03-26-2009, 01:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •