Re: looking for a controller for Mach 3/4 with interface for stepper motors, tool cha
Originally Posted by
j97386
These encoders are built into the servos. Lowest price I got to repair...$750. .
I have replaced many encoders, both shaft type and through hole, generally is is not that a difficult issue?
The only time it really gets tricky is with BLDC motors where the encoders also have commutation tracks that have to be aligned using a double beam 'scope.
But not difficult if you have access to one.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.