Hi All,

Have a new to me 2008 Soarer LB300-M with OSP-U10L control. Im not familiar with the U10L control however am familiar with multiple other OSP controls. The IGF on the U10L is different to what i'm used to in that you define the whole shape then auto process decide works out the machining method based on the tools setup form what i can see.
I really don't like this style of the machine deciding the program and having to check over it and check the sequence it decides to do things in, I'm much more used to how say an OSP5000/7000 IGF and even newer E100L/P300 control does things where you define the shape that, that particular tool do after you have decided the process to take eg facing, od turning, grooving, threading, face milling, side milling etc. Is there a way on the U10L to have this setup the same way and do away with the auto process decide? I have tried a few different things and can get close to how i want it but not close enough and it seems cumbersome.