I am new to CNC and have just made about a $5,000 investment so I am looking forward to learning more. I have been doing several test pieces and have run into something I cannot find the answer to.
How do I cut away the waste areas to reduce the overall height near my profile cut? I am sure there is an easy way I am overlooking. I have attached a screenshot of a test piece with an area marked in red. That is the area I want to cut down to a level where my spindle wont hit it on deep cuts. I am using Vectric Aspire.
Thread: Need a little help
Results 1 to 2 of 2
Threaded View
-
11-06-2020, 09:33 AM #1
Member
- Join Date
- Oct 2014
- Posts
- 6
Need a little help
Last edited by dmyers1429; 11-06-2020 at 10:25 AM.
Reply With Quote
Posting Permissions
