Hey guys I've an issue with the lubrication on my cnc lathe, every so often it comes up with a message saying ex1050 pressure setting error, it goes away when I reset machine. The pressure gauge only goes up to 7kg/cm2 when I press the button, lube oil seem to be coming out between carriage onto the rails. Thanks any advise will be greatly appreciated.
Results 1 to 4 of 4
Hybrid View
-
11-08-2020, 05:18 PM #1
Member
- Join Date
- Nov 2020
- Posts
- 5
Ex1050 lube pressure setting error cnc dugard lathe 26120 fanuc
-
11-08-2020, 06:56 PM #2
Member
- Join Date
- May 2016
- Posts
- 526
Re: Ex1050 lube pressure setting error cnc dugard lathe 26120 fanuc
Possibly the pressure switch has failed or requires adjustment
-
11-08-2020, 07:19 PM #3
Member
- Join Date
- Nov 2020
- Posts
- 5
Re: Ex1050 lube pressure setting error cnc dugard lathe 26120 fanuc
Where abouts is the pressure switch, thanks
-
11-09-2020, 10:28 AM #4
Member
- Join Date
- May 2016
- Posts
- 526
Re: Ex1050 lube pressure setting error cnc dugard lathe 26120 fanuc
On top of pump I think depends on model of lube pump
Send me a pic of pump either on here or preferably by PM as I don't get notifications for this post
Reply With Quote
