Originally Posted by
Heavy_Metal
Hey ksfsds,
About my advice for the ---- Fanuc Memory Card Program Edit Tool (v5) - Fanuc A08B-9010-J700/ZZ11.
I was too fast with my quote " it runs on a 0i-D Series ", this is an option for that control, it's standard on the 0i-F Series, the numbers for the 0i-D are;
A02B-0319-R642 ( 0i-TD - Lathe )
A02B-0320-R642 ( 0i-MD - Mill )
When your control has the [ MEM-CARD ] and [ MEMORY-CARD ] soft-keys then you have probably the A02B-0320-R642 option that's needed to operate with the Memory Card Tool.
I couldn't find a price for activation that option by Fanuc or a dealer, but you always can try a BIN-file before you buy the Tool.
Regards.