Re: 94 Cadet LNC8 program loading
I think that machine has the floppy drive on it? It can use both DOS and Okuma formatted floppies. That will be the easiest way. Copy your program to the DOS disk as a text file then:
MSDOS>PIP>COPY>FD0:ABC.TXT,MD1:ABC.MIN
That should rename it as it comes in from the floppy to Main Machine memory.
Then go to Auto and program select it. Or go to Edit and edit it to see how it looks.
Once your used to the machine revisit the RS232 method. There’s several posts on here about that.
Best regards,
Experience is what you get just after you needed it.