Hello everyone, so a week ago i've start building my first ceramic 3d printer i've started by building the ram extruder it uses :
nema 23
R60 microstep driver
30:1 gearbox
1mm pitch screw +nut
duet 2 wifi
?
and my problem is the step/mm or the ram extruder is too high 280000 step/mm
because of the gearbox.
When i use 280000 step/mm the extruder extrude the right amount but i won't change speed
so i've change it to 100 step/mm and i'm thinking change the extrusion factor to 4000%
What do you guys think ?