584,805 active members*
4,987 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Jun 2010
    Posts
    7

    Reversed rotation

    Is it possible to change the ”default” direction the servo rotates, in the software?

    I have a servo as slave and I can’t change so master and slave rotates in different directions in the controller software. I have a rack and pinion machine and DYN4

    Regards
    Christer

    Dyb

  2. #2

    Re: Reversed rotation

    Quote Originally Posted by brunolundh View Post
    Is it possible to change the ”default” direction the servo rotates, in the software?

    I have a servo as slave and I can’t change so master and slave rotates in different directions in the controller software. I have a rack and pinion machine and DYN4

    Regards
    Christer

    Dyb
    Normally can be set by parameters, depends on what brand servo are you using.
    http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html

  3. #3
    Join Date
    Jun 2010
    Posts
    7
    Quote Originally Posted by cncmakers001 View Post
    Normally can be set by parameters, depends on what brand servo are you using.
    Its DMM techology. With the DYN4 driver

  4. #4
    Join Date
    Nov 2013
    Posts
    4280

    Re: Reversed rotation

    Hi,
    I use Delta servos which are very similar, and you can set the Direction pulse input active high OR active low thereby reversing the direction.

    Do you have and are you using DMM's set up and tuning software? If so it should be easy enough to find the correct parameter to adjust.

    Craig

  5. #5
    Join Date
    Jun 2010
    Posts
    7

    Re: Reversed rotation

    I got answear from DMM.
    I needed to connect some pins in the SUB25 connector on the driver.
    Needed 5V in some analog reference.

    Now it works great

Similar Threads

  1. Replies: 1
    Last Post: 03-18-2021, 06:38 PM
  2. Panasonic Minas A4 - Reverse Motion Rotation / Direction
    By Mutantmatt9000 in forum Servo Motors / Drives
    Replies: 3
    Last Post: 11-11-2016, 12:50 AM
  3. How to Reverse Rotation on Panasonic Minas?
    By parametric.ms in forum Servo Motors / Drives
    Replies: 4
    Last Post: 10-11-2009, 02:57 PM
  4. Reverse
    By frankg521 in forum Mach Mill
    Replies: 3
    Last Post: 08-06-2007, 03:08 AM
  5. Reverse?
    By UKRobotics in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 09-12-2006, 12:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •