what other wires do i need to connect to get this spindle to spin.
im using mach4 essmb3 with the mb3 profile installed
when i enable mach4 and enter m04 s5000 i get voltage out of AG AO pins. And( Y101 & N03 ) light up but i dont know what to connect there to get this spindle to turn.
Results 1 to 1 of 1
-
12-03-2020, 04:38 AM #1
- Join Date
- Nov 2020
- Posts
- 15
spindle wiring help just to get it to turn
Reply With QuoteSimilar Threads
-
motors turn on but will not move, wiring diagram incorrect?
By tnessamateur in forum Stepper Motors / DrivesReplies: 10Last Post: 12-30-2018, 06:17 PM -
wiring turret of an EMCO TURN 140 Lathe
By mazakfred in forum EMCO LatheReplies: 0Last Post: 12-15-2014, 03:48 PM -
c11 breakout board wiring. Motor won't turn. Need help please!
By frank1979 in forum DNC Problems and SolutionsReplies: 14Last Post: 10-11-2013, 10:56 PM -
turn-key wiring solutions
By williamsmotower in forum Charter Oak Automation Support ForumReplies: 3Last Post: 04-01-2011, 04:30 PM -
interact 4 spindle drive won't turn on spindle
By 0041601 in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 06-23-2008, 11:51 PM
Tags for this Thread
Posting Permissions
