584,814 active members*
5,148 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Spindles / VFD > Huanyang GT Series VFD and MASSO
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2016
    Posts
    7

    Huanyang GT Series VFD and MASSO

    Hello,
    Has anyone hooked up a MASSO to a Huanyang GT series VFD? I am not familiar with the GT series control circuit terminals. The 0-10v connection seems clear but I don't see a FWD connection. Totally appreciate any help. VFD works fine in manual mode but can't figure out the connection part. Thank you so much, Matt

  2. #2
    Join Date
    Jan 2005
    Posts
    15362

    Re: Huanyang GT Series VFD and MASSO

    Quote Originally Posted by Matt-y View Post
    Hello,
    Has anyone hooked up a MASSO to a Huanyang GT series VFD? I am not familiar with the GT series control circuit terminals. The 0-10v connection seems clear but I don't see a FWD connection. Totally appreciate any help. VFD works fine in manual mode but can't figure out the connection part. Thank you so much, Matt
    S1 and Com is for the FWD connection plus the any needed Parameters for remote control
    Mactec54

  3. #3
    Join Date
    Mar 2016
    Posts
    7

    Re: Huanyang GT Series VFD and MASSO

    You rock mactec54. Thank you! I would not have figured that out.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •