584,812 active members*
5,484 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2017
    Posts
    18

    Lightbulb spindle configuration

    I am running my machine (custom built) with UCCNC and the AXBB controller. If I bought a new spindle (different manufacturer), same specs, would it be just plug and play or what configurations would I need to change?

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: spindle configuration

    You'd only need to change settings if you wire the VFD to the AXBB using different pins.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Similar Threads

  1. DM2400 spindle configuration
    By jakdad in forum Dyna Mechtronics
    Replies: 14
    Last Post: 01-29-2018, 02:21 PM
  2. Replies: 2
    Last Post: 05-02-2017, 03:26 AM
  3. Replies: 1
    Last Post: 07-12-2010, 01:45 PM
  4. Spindle configuration
    By Zaryk in forum Mach Mill
    Replies: 1
    Last Post: 10-07-2008, 03:05 AM
  5. ANSI A2-5 Spindle Configuration
    By Crashmaster in forum MetalWork Discussion
    Replies: 0
    Last Post: 06-20-2007, 07:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •