534,885 active members*
3,332 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jul 2009
    Posts
    25

    Trumpf L3030 Acceration Issue

    Our 20 year old laser has done lots of cutting and its getting tired. I want to cut the acceleration down a bit as it really jerks when it goes to move and covers have come loose in the past. Thought it would be easier on the old girl if we cut the acceleration down. We had a trumpf brake that was really jerky and sometimes acted up. I went into the parameters on the brake cut the acceleration down a bit and it really smoothed things out. It was pretty obvious how to set acceleration on the brake but when i go into the laser it is not clear. If anyone knows how I would really appreciate hearing.

    Thanks
    Geoff

  2. #2
    Registered
    Join Date
    Jul 2013
    Posts
    10

    Re: Trumpf L3030 Acceration Issue

    If its a newer trumpf ....TC_DYNAMIC_LEVEL(1) (-1) is better cut,,, less acceleration (0) is trumpf standard (1) is user programmable
    This must precede it in the header TC_USERDYN(1.2,5.0) ( that is factory setting you can dial down to 1.0, 4.5 maybe if need be)
    it is my belief that changing the bearings and keeping the machine properly lubed you should be able to run with factory presets)

Similar Threads

  1. trumpf trulaser l3030 fiber
    By Nielske93 in forum General Fiber Laser Cutting
    Replies: 0
    Last Post: 09-21-2020, 04:18 PM
  2. TRUMPF L3030 - NCU error - MN_IPO_PARAM_NAME_TAB
    By bencaha in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 1
    Last Post: 07-28-2020, 08:13 AM
  3. Trumpf L3030 4kW nitrogen high consumption
    By Morderesh in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 1
    Last Post: 06-05-2019, 07:10 AM
  4. Engraving Settigns for Trumpf L3030 TFL4000
    By TShook in forum Commercial Laser
    Replies: 0
    Last Post: 04-30-2018, 07:19 PM
  5. TRUMPF TRUMATIC L3030
    By ratachosis in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 0
    Last Post: 04-13-2010, 07:08 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •