I am a woodworker of 40+ years (flat work and lathe) that has decided to venture into the CNC world. No programming or cnc experience at all so am ignorant when it comes to this, but am willing to learn as best I can. I purchased a 6040Z 4 axis machine (of course from China) and am in the process of set up. Will likely download and then purchase the license for the Mach4 software for this. I have a few (which I am sure will turn to many) questions.
Since I have a WIN 7 computer and no parallel port for the program, am buying a UC100 adapter for compatibility. (As advised by the tech at Mach support). He said he will help me set everything up once the hardware arrives. I want to be prepared to do a lot of test runs once this is up and running and need to purchase bits. The machine collets are 6mm and 1/8" shank. Without breaking the bank, can anyone guide me to what basic bits I need to start? I want to eventually do 3D relief, signs and cylindrical designs.
Any and all help will be appreciated.
Hope to be active on here.
Thanks,
Tim "Knothead"