541,824 active members*
3,199 visitors online*
Register for free
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2019

    Accident repair

    I have got a cnc lathe slant bed of jyoti fanuc oi tf controller 2 axis.. the issue which I am facing is that few weeks back one of my employee crashed the machine and I have got the engineers of the company and got the allignments fixed of head (spindle) -.110 in the length of 200mm, and z -.300 under 0.20... But the issue is still it gives taper of +0.030 in the length of 45 mm.... Can't think of what could be the issue as it doesn't even makes any sound of breakdown....if I use the maximum boring bar which is 40 mm for the machine there's no taper or misalignment on the use of below 40 boring bars like 32 or 25 on smaller Id workpieces. It shows taper of 0.030 on 45 mm length. Can anyone help don't know what could be the issue..
    As the company service people of jyoti isn't much of help because on id theres no taper just on id and using boring bar holders below 40... Theres no load on any motor or spindle

  2. #2
    Join Date
    Jun 2020

    Re: Accident repair

    Could you tell me some more information about it? Let’s talk in PM

  3. #3
    Join Date
    Nov 2020

    Re: Accident repair

    Not the most pleasant situation. A colleague paid for the repair of your car? I just had a similar problem, and my colleague did not want to pay money to repair the car. Instead, he blamed me for what happened. I had to ask for help from a lawyer I found on https://www.thorpehatcher.com/. I am annoyed by this kind of injustice. In my situation, the person just didn't want to be held accountable for their actions. He tried to get the money by cheating. If it wasn't for the lawyer, I wouldn't have been able to prove his guilt.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts