Hi guys
Im seeking some electrical info here,
Im currently running my cnc with Longs Steppers 3amp , with JVL SMD41A3 Drivers that max out 3 amp..
I have some Vexta steppers " nema34 " that are 6amp rated ,, and was wondering if i can drive them with my drivers ? Im currently upgrading my cnc with 2010 ballscrews from THK and my work is everything from wood to steel...
plastic and wood i usually mill at the moment at 3600 mm/m with doc ranging from 0.5-2.5mm with my current 1605 ballscrews.. so thoughts are that im hoping i get the same with the vexta with 2010...
Alu and steel i run much slower , usually on 1200 mm/m and only with 0.8mm doc
I use this psu that is 76vdc with 13A
https://www.ebay.com/itm/76Vdc-13A-p...IAAOSw1ZBUx97b
Can i run it , or will i loose to much torque ?
Thx for all reply in advance Love this forum...