I'm in the process of building a new table and have been researching what controller to go with. I've built a few tables in the past and have used Flashcut and CandCNC (w/CCNC).

The biggest issue I have with Flashcut is the initial cost and the cost of add-ons. CandCNC with CCNC was reasonable on the cost side of things, but with no previous Linux experience, I trouble shooting OS issues was a struggle.

Here are the controllers I've been looking at:

UC300ETH w/UCCNC. Neuron has a THC the integrates into UCCNC, but I've come across some threads of issues getting the THC units due to customs. I know Proma THC will work with UCCNC, but I want the THC integrated into the UCCNC screen.

Vital Systems ArcPro. This seems like a professional system with integrated THC, but in researching there seems to be a bunch of negative threads on Mach4. So I've very hesitant.

MyPlasm CNC. This comes with its own THC. Overall it seems very limited on settings and as far as I can tell it can only control a torch, no plate marker.

I'd appreciate hearing input on either the systems above or ones I may have over looked. The main requirements are integrated real time THC and the ability to add tools such as a plate marker.