Hi
I have a problem with the Fanuc Panel 180i-PB
as shown in video:
https://youtu.be/RrnNpmEk5DU
It won't boot the system... Can anyone help me to identify the problem and solution?
Hi
I have a problem with the Fanuc Panel 180i-PB
as shown in video:
https://youtu.be/RrnNpmEk5DU
It won't boot the system... Can anyone help me to identify the problem and solution?
Do you have any alarm shown in the CNC ?
Regards
AlexFanuc
the leds from the mainboard will tell you what kind of problem you have on the boot sequence.
if the cnc is on the back of your screen look on the left lower side for 6 leds and the sequence of leds will tell the problem
same if the cnc is stand alone and is on electrical cabinet
please post a photo of the leds
This looks like possibly an issue with the Windows boot loader?
I'm not sure on the steps, but maybe try to repair the installation with a Windows startup disc.