We have a Mori Seiki SL-153 lathe.
Every morning we start it up we get (2) errors. We have to completely turn the machine off by: E-Stop, Power off, and main disconnect to get rid of the alarms. After we perform the power off, the alarms go away.If we don't turn off in this order we can get different alarms on the power up.

Alarms are:
NC 414 Servo Alarm: Axis Detect Err [X]
NC 449 Axis:Inv. IPM Alarm [X]

I found the NC 449 in the manual but not the 414 alarm.

Thanks for the forum space. Look forward to direction on resolving our challenge.

Brad, New Haven Indiana