I got problem on 4020 machine
This is finishing problem when I make a cut in straight line
The finish is o.k.
But when I make the cut with two axis together
I got wavy finishing
did somebody had problem like this
i checked resolver-borads-gibs
and tune amps!
Results 1 to 5 of 5
-
01-02-2021, 10:44 AM #1
Member
- Join Date
- Aug 2017
- Posts
- 98
XY cutting problem/surface finish
-
01-02-2021, 07:30 PM #2
Member
- Join Date
- Dec 2003
- Posts
- 1216
Re: XY cutting problem/surface finish
What cutting parameters were you using?A light hobby machine can't be expected to operate at the sort of speeds and cutting depth that an industrial machine would be comfortable with.
-
01-02-2021, 08:07 PM #3
Member
- Join Date
- Aug 2017
- Posts
- 98
3500rpm
Originally Posted by routalot
.1 amount
feed=850mm/min
-
01-03-2021, 09:27 AM #4
Member
- Join Date
- Dec 2003
- Posts
- 1216
Re: XY cutting problem/surface finish
The material is?
-
01-03-2021, 06:21 PM #5
Member
- Join Date
- Aug 2017
- Posts
- 98
i cleaning boards and reseating all boards Originally Posted by routalot
problems fixed
cutting is ok and mirror finish obtained
Reply With QuoteSimilar Threads
-
Hemisphere surface finish problem
By MFchief in forum Tormach Personal CNC MillReplies: 12Last Post: 10-11-2014, 03:34 AM -
X3 Surface Finish Contour Problem
By moto1965 in forum MastercamReplies: 12Last Post: 01-10-2012, 03:52 AM -
Surface finish toolpath problem in X5
By yenchen23 in forum MastercamReplies: 6Last Post: 12-05-2011, 06:23 AM -
Surface finish problem
By gar in forum Haas MillsReplies: 65Last Post: 05-22-2008, 03:01 PM -
3D Milling Surface Finish Problem
By TurboME in forum MetalWork DiscussionReplies: 15Last Post: 12-18-2006, 05:32 AM
Tags for this Thread
Posting Permissions
