Hello all.
I picked up a small CNC router a while back and have replaced the Chinese controller with one from Planet CNC. Everything was working fine up until the other day.
The controller and the computer connect and all works fine until I turn on the spindle. Then the machine disconnects from the computer. If I unplug the cable to the spindle, the computer will not disconnect. The spindle does spin up as it should when the cable is plugged in.
I attached two pictures, one of the laptop screen, and the other of the controller. I have no idea what happened, but I'm sure it's something simple. I tried a different USB cable and made sure the spindle cable was well away from the USB cable. Any help would be appreciated. If there's a thread covering this, please link me to it, I didn't find anything doing a search.
Thanks
Dan