584,846 active members*
4,153 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2019
    Posts
    53

    Citizen M32 Meldas 600 zero return

    Friends, I'm fine I hope you are doing well I have a problem with the machine a Mitsubishi m32 m600 at the turret level when I make the origins of the axes and the turret after I turn off the machine and I turn on the machine it loses its position each time I restart the machine it is necessary to make the origin of the turret

  2. #2
    Join Date
    Apr 2021
    Posts
    8

    Re: Citizen M32 Meldas 600 zero return

    Normally, a M32 with a 600 control, after the first time that you homed all axis, the cnc should retain position after shut down, when you power back up, all you need to do is retract the turret and go to the start position screen, hit start and all axis will go to their start positions, if not, a parameter or two is not set right or something on the electrical side is wrong, but with the electrical side you will get a alarm.

  3. #3
    Join Date
    Jul 2019
    Posts
    53
    Exactly all the axes are perfectly at the origin but if right there Turret is after opening the encoder I found that the coupling Between the encoder and the motor and defective after rules that now when I turn on the machine there is Emg there is nothing that is engaged
    Attached Thumbnails Attached Thumbnails D80464D2-0ABA-4EAA-BCD7-ED0E674473E1.jpg  

Similar Threads

  1. Citizen l32 meldas 500 no system
    By Drisscn in forum CITIZEN Machines
    Replies: 0
    Last Post: 03-06-2020, 02:29 PM
  2. How to zero return / home axis meldas 500
    By diaowee in forum Mitsubishi controls
    Replies: 4
    Last Post: 06-05-2019, 12:14 PM
  3. Citizen L20/Mitsubishi won't zero return
    By WillRitter in forum CNC Swiss Screw Machines
    Replies: 3
    Last Post: 01-31-2013, 02:04 PM
  4. Citizen L20 Zero Return issue
    By Superfly33 in forum CNC Swiss Screw Machines
    Replies: 5
    Last Post: 02-25-2010, 02:14 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •