[Aksa]

I have okuma lc10, but G commands dosnt work toghether with S command
Here is a example if i type:
G14
S400M3
G0 X20
Spindle will start rotate but g funcion will not work without any error,
But if i type just G command in MDI it works.

[Algirdas]

check if spindle rpm reaches the desired level.
Look into the programming manual if there is G code ( or maybe M ) to execute the command without confirmation if previous command completed. It is marked as dangerous command. Used mostly to index turret without confirmation the turret indexing ( limit ) position.
Try reduce spindle speed.
If there is spidle gear switching in your machine? try another gear for the spindle speed.

[broby]

I have okuma lc10, but G commands dosnt work toghether with S command
Here is a example if i type:
G14
S400M3
G0 X20
Spindle will start rotate but g funcion will not work without any error,
But if i type just G command in MDI it works.

Can you please post ALL alarms that come up?
Will it make any difference if you are in Single Block mode or not?

[Aksa]

Can you please post ALL alarms that come up?
Will it make any difference if you are in Single Block mode or not?

Nope, and there is no alarms i just had chuck clamp alarm but i fixed it

[Aksa]

check if spindle rpm reaches the desired level.
Look into the programming manual if there is G code ( or maybe M ) to execute the command without confirmation if previous command completed. It is marked as dangerous command. Used mostly to index turret without confirmation the turret indexing ( limit ) position.
Try reduce spindle speed.
If there is spidle gear switching in your machine? try another gear for the spindle speed.

I was trying to find that m command but i cant find it in manuals

[Algirdas]

check if it is related to spindle rotation speed first. Reduce RPM, try dwell command ( G04 ? ) before G0.
there are more places where root of problem can be. For instance, try G0 without spindle command. Try Rapid feederate override knob or command.
Find the screen where details of command execution are shown. Is there remaining distance, positioning speed indicated?
Check if G01 is working correct.

[Aksa]

check if it is related to spindle rotation speed first. Reduce RPM, try dwell command ( G04 ? ) before G0.
there are more places where root of problem can be. For instance, try G0 without spindle command. Try Rapid feederate override knob or command.
Find the screen where details of command execution are shown. Is there remaining distance, positioning speed indicated?
Check if G01 is working correct.

G01 not working as well
G0 work without spindle command

[Algirdas]

execute the G code command "feed per minute". Maybe then G01 starts to work.
The reason can be in the global mode "feed per revolution" now.