584,862 active members*
5,349 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Logic Trace CNC/DXF > tracing a diagram for feather art
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2007
    Posts
    1010

    tracing a diagram for feather art

    going to show tracing out some feather art and then cutting the feather from a birch 1/8 inch skin on the CO2
    laser and the color parts out of black and red vinyl

    https://youtu.be/NF015BinBuE
    Attached Thumbnails Attached Thumbnails net3.jpg   net5.jpg   net4.jpg  

  2. #2
    Join Date
    Mar 2021
    Posts
    1

    Re: tracing a diagram for feather art

    I found it while searching. This subject is very old but I started to be interested in this art. I will try to experiment with some sample photos from this site. https://artchapter.com/all-about-feather-art/

Similar Threads

  1. digitizing an art feather
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 10-25-2020, 03:59 PM
  2. tracing an electric guitar diagram
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 2
    Last Post: 02-29-2020, 08:36 PM
  3. tracing out a mennoite carriage diagram and digitizing it
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 2
    Last Post: 09-01-2019, 02:38 PM
  4. tracing an elk detailed diagram
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 09-01-2019, 02:22 AM
  5. tracing out an old diagram in a grid pattern
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 03-23-2014, 03:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •