506,584 active members
4,139 visitors online
Register for free
Login
Page 6 of 8 45678
Results 61 to 72 of 92
  1. #61
    Registered
    Join Date
    Jul 2009
    Posts
    1
    Hi:

    In the place i worked, there are some walter helitronic power CNC and we use cyber grinding software. Does anybody know how to import files from this software to a CAD software? or other way to make simple drawings of the tools?

    Thanks.

    mnaestor@hotmail.com

  2. #62
    Registered
    Join Date
    Oct 2008
    Posts
    2
    Got a link or pdf documents with studio tools, if you give one or two in my research did not find a picture much thanks


    cncsurgeon@hotmail.com

  3. #63
    Registered
    Join Date
    Sep 2009
    Posts
    1
    Hi I am new to this forum also! I've been using a Helitronic Walter cnc Grinder for now 1 year.
    I would like to upgrade the ToolStudio calcul speed and download, when there's a change of value on the program. Is it possible to change the Ram card on the CNC computer? Do I need special Ram bracket ?

    There's always bug on the anime schema of the tool, part missing, lag etc.. Is there any other way to get it faster and better quality than changing the RAM?

    Thank you all.

  4. #64
    Registered
    Join Date
    Nov 2009
    Posts
    2
    Good time of the colleague! I from Russia, work on machine tool Walter Vision three years. I prefer to work only in "Tool Studio". I am guided on not the standard tool. I can help to write or correct yours IDN.C interest I will communicate on this theme.

  5. #65
    Registered
    Join Date
    Nov 2009
    Posts
    2
    The Ram disc not the main thing if you initially not input incorrect or silly actions with a problem the minimum complete set will consult also.

  6. #66
    Registered
    Join Date
    Jan 2010
    Posts
    1

    Woodtronics NC3 Error

    We have a 10 year old much used NC3 and are getting a " motor protective switch activated" error message and then it shuts down. We had the motor checked out and it is perfect. Any ideas?

  7. #67
    Registered
    Join Date
    May 2011
    Posts
    0
    Hello, I would like to know how to activate the Stereo Mode in sudio tool. The box is currently impossible to activate .. thank you

  8. #68
    Registered
    Join Date
    Oct 2011
    Posts
    0

    Countersinks?

    Hi All, I am new on here and would like to see if anyone has any information on how to do countersinks on the Walter HMC Power machine. I could use any help anyone can provide. Thanks Ross

  9. #69
    Registered
    Join Date
    Jan 2007
    Posts
    99

    countersinks

    what type of counter sinks?
    new? regrind? single flute? multi flute?

    they can be done, but its just easier to do them on a manual machine. especialy since they arent worth much to sharpen.

  10. #70
    Registered
    Join Date
    Jan 2008
    Posts
    2
    Has anyone running Walters expert mode had this problem with probing? Machine positions to programmed zero point but feeds away from probe instead of into it. The machine is a HMC 500 with NT. Thanks for any help.

  11. #71
    Registered
    Join Date
    Jan 2007
    Posts
    99
    Use a negative value for that input.
    Buzz me if. U need more info

  12. #72
    Registered
    Join Date
    Jan 2008
    Posts
    2
    I tried that but that causes the machine to go to the wrong start point.

Page 6 of 8 45678

Similar Threads

  1. Walter Grinder
    By Burnout2676 in forum Toolgrinding / Toolgrinding Machines
    Replies: 0
    Last Post: 08-13-2013, 01:07 PM
  2. How do you resharpen a tap using the Walter hmc 500?
    By hkpd in forum General Metalwork Discussion
    Replies: 0
    Last Post: 05-29-2013, 02:54 PM
  3. WALTER, ANCA CNC TOOL GRINDERS -USED
    By ptd in forum News Announcements
    Replies: 0
    Last Post: 08-23-2011, 03:44 PM
  4. WANTED USED WALTER HMC 400
    By hemara in forum Toolgrinding / Toolgrinding Machines
    Replies: 0
    Last Post: 12-21-2010, 03:39 PM
  5. walter GC8
    By bobcor in forum Toolgrinding / Toolgrinding Machines
    Replies: 1
    Last Post: 07-15-2005, 06:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •