584,846 active members*
3,763 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Program select from floppy
Results 1 to 8 of 8
  1. #1
    Join Date
    Oct 2009
    Posts
    114

    Program select from floppy

    Hi everybody

    Our LU 15M machine is running from disket driver but MB 56 machine doesn't run from floppy diskett driver.
    ?t gives 5261 error

  2. #2
    Join Date
    Mar 2009
    Posts
    1982

    Re: Program select from floppy

    What is your point? You want to transfer part program from the lathe to MC ?
    In my understanding both LU15M and MB56 should run even with floppy drive detached, but most likely it is not your question here.

  3. #3
    Join Date
    Oct 2009
    Posts
    114

    Re: Program select from floppy

    I mean program select and cycle start

  4. #4
    Join Date
    Mar 2009
    Posts
    1982

    Re: Program select from floppy

    clear. First of all, do you see ( on OSP ) the contents of the floppy?
    Is the floppy Okuma OSP format or MS-DOS format?

  5. #5
    Join Date
    Oct 2009
    Posts
    114

    Re: Program select from floppy

    Yes I see inside of floppy. It is OSP format.

  6. #6
    Join Date
    Aug 2009
    Posts
    1567

    Re: Program select from floppy

    ..720 or 1.44 format

    5,25 disk?

  7. #7
    Join Date
    Oct 2009
    Posts
    114

    Re: Program select from floppy

    1.44 format copying ok but program select no it is option or parametric ?

  8. #8
    Join Date
    Aug 2011
    Posts
    418
    Quote Originally Posted by MCR-B II View Post
    1.44 format copying ok but program select no it is option or parametric ?
    Program select from floppy is option.
    it is a special function and can be activated.
    "Imagination is more important than knowledge."

Similar Threads

  1. USING MACRO/SUBROUTINES TO SELECT BOLT HOLES IN A PROGRAM
    By bulldozer55 in forum G-Code Programing
    Replies: 13
    Last Post: 03-05-2019, 09:10 PM
  2. USING MACRO/SUBROUTINES TO SELECT BOLT HOLES IN A PROGRAM
    By bulldozer55 in forum Joes CNC Model 2006
    Replies: 0
    Last Post: 12-13-2018, 09:32 PM
  3. Can't load program from floppy
    By dresda in forum Milltronics
    Replies: 16
    Last Post: 07-24-2011, 03:04 AM
  4. Program tool pot select on an umbrella?
    By calgarykevvy in forum Okuma
    Replies: 3
    Last Post: 12-05-2010, 12:18 AM
  5. Program load/select list on V2XT Boss XT 3.4 control
    By rfdoyle in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 02-23-2007, 03:36 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •