584,865 active members*
4,809 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1

    Masterwood Retrofit

    Hello,
    i put a scheme of what i want to do :


    I bougth a piece of card (Z80, CPU683 68EC020 PLC Tecnos system and input / output) for upgrade my cnc Master Project 323 who's working correctely with his old system under Dos ... but not very easy to use
    These cards was working into a Masterwood Project 309 retrofitted

    I replace old card (68000 named 681) by 683
    and Z80 Si_89 by Si_96

    I wonder if someone could help me to introduce good parameter to make it working ?

    Regards, GLP

  2. #2

    Re: Masterwood Retrofit

    Hello,
    some photos of retrofit of the Masterwood :

    this new CPU3-2M CPU68EC020-2003-01 (31SFC104640) card

    will replace the older CPU1 (68000) KTC91
    new old

    The old I/O cards (ACCTC90/02) will be replaced by new I/O cards 61SFA300101 (ASSI_CC_2007_01)


    The communication interface Si2.5 is replaced too by SFS10150 SI_96_01 (31SFS101460)



    and RamDisk Card is suppressed because no need anymore

    the software MasterWork drive everything

    To be followed
    Attached Thumbnails Attached Thumbnails Carte RamDisk.jpg  

Similar Threads

  1. MasterWood 365 5axis - Masterwood Opinions
    By zedodia in forum Commercial CNC Wood Routers
    Replies: 25
    Last Post: 03-05-2024, 03:13 PM
  2. Masterwood 317
    By WWWOODMAN in forum CNC Machining Centers
    Replies: 4
    Last Post: 02-12-2020, 12:44 AM
  3. masterwood
    By gcc in forum Commercial CNC Wood Routers
    Replies: 8
    Last Post: 08-12-2013, 01:31 PM
  4. Masterwood Speedy 315
    By Mike-CIW in forum CNC Machining Centers
    Replies: 3
    Last Post: 07-21-2009, 03:13 AM
  5. Replies: 31
    Last Post: 11-27-2008, 06:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •