Hi There,
I'm just about finished with my Standard 4x8 machine assembly, and the last step is to mount the spindle to the Z axis.
I did not buy the Avid plug and play spindle and went with the air cooled chinese 2.2kw spindle. It is the square style with a flat back and 4 holes on each side to mount,
and I also purchased the Router Mount Base Adapter from Avid, but apparently the holes on this mount are for AVID's spindle and will not match with the holes for this type of spindle I bought.
I also could not find on Avid's website any mount that would work with this spindle.
So I'm coming to you for help, how in the world can I mount this spindle on my machine?
Any help is highly appreciated.
GMo