I am new to using a CNC. I have a CNCEST 6040, 4 axis, 1.5kw spindle. I reprogrammed the VFD values. Now the spindle will spin, but it is not moving on any of the axis. It doesn't matter if I'm using manual or computer. As I said I am new to this, Any and all help is appreciated.
Thread: Desperately Need VFD help!
Results 1 to 3 of 3
-
02-16-2021, 04:32 PM #1
- Join Date
- Feb 2021
- Posts
- 1
Desperately Need VFD help!
-
02-16-2021, 07:20 PM #2
Community Moderator
- Join Date
- Dec 2003
- Posts
- 24221
Re: Desperately Need VFD help!
What motion (CNC) system is it running?
How is it programmed G.M. code etc?
You should be able to move the axis regardless of the spindle via a MDI move.
Al.CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.
-
02-16-2021, 11:54 PM #3
Member
- Join Date
- Apr 2004
- Posts
- 5737
Re: Desperately Need VFD help!
Does it move if the spindle and VFD are turned off?
Reply With Quote
Similar Threads
-
Desperately need help with Sinumerik 3T
By Smokio in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 12-26-2013, 03:59 PM -
New to WaterJet and desperately need help!
By Danimal25 in forum Waterjet General TopicsReplies: 7Last Post: 01-05-2011, 12:38 AM -
desperately need help
By rusty abe in forum Linear and Rotary MotionReplies: 0Last Post: 06-30-2010, 02:54 AM -
Mitsubishi 110 G Need Some Help Desperately
By worldsworstfish in forum EDM Discussion General TopicsReplies: 9Last Post: 05-05-2010, 10:06 PM
Tags for this Thread
Posting Permissions
