Ok Manufacturer of machine said all 3 wires L1/L2/L3 need be 220volts each Line. But I am getting 120/120/247 to ground which is throwing the lathe in out of phase alarm. Attached is the wires.
Results 1 to 1 of 1
-
01-28-2021, 05:42 AM #1
- Join Date
- Jan 2021
- Posts
- 1
Bought a Chinese 3 Phase 220V CNC Lathe To USA Voltage
Reply With QuoteSimilar Threads
-
220v Chinese motor both hot leads need to be 220v?
By CNCgenie9910 in forum Laser Engraving / Cutting Machine General TopicsReplies: 8Last Post: 01-16-2024, 05:21 AM -
220V single phase VFD 3 phase output for powering a 200V 3phase AC Servo drive/motor
By graupnerhansen in forum Spindles / VFDReplies: 34Last Post: 08-17-2021, 07:16 AM -
Getting single phase 220v and 110v from 3 phase 220v
By PIVOTALCUSTOMS in forum CNC Machine Related ElectronicsReplies: 29Last Post: 05-14-2019, 11:41 PM -
Bridgeport R2E3 delima, 220v VFD 3 phase Versus 220V Single Phase
By ronderkis in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 03-25-2015, 04:01 AM -
fitting a 110v or 220v single phase spindle motor on a 3 phase machine
By mwood3 in forum Benchtop MachinesReplies: 12Last Post: 10-13-2009, 03:53 AM
Tags for this Thread
Posting Permissions
