584,861 active members*
4,815 visitors online*
Register for free
Login
Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    Dec 2014
    Posts
    3

    AFTER THE TOOLCHANGE THE SPINDLE STOPS

    HELLO EVERYONE
    SUDENLY WHILE EVRYTHING WAS WORKING NORMAL THE MACHINE (MAZAK VTC-300C-II) STOPS AND WAIT WITHOUT SPINDLE AFTER THE TOOLCHANGE.THERE IS NOTHING WRONG WITH THE PROGRAMME.IF I PRESS THE RESET BUTTON AND THEN RUN THE PROGRAMME AGAIN IT DOESN'T WORK BUT IF I PRESS THE EMERGENCY STOP BUTTON AND THEN RYN THE PROGRAMME IT WILL WORK JUST UNTIL IT GETS THE OTHER TOOL AND STOP AGAIN.

    THANKS FOR THE HEPLING ANYWAY

  2. #2
    Join Date
    Dec 2014
    Posts
    3

    Re: AFTER THE TOOLCHANGE THE SPINDLE STOPS

    good day,friends
    I am facing a problem on mazatrol fusion 640M.
    I start a programm with 1 tool (for example 5).When tool 5 is on spindle ,the programm is executing,properly.After tool cahnge(for example no7) the spindle stays standby,with no error,nothing!
    if I split the 2 programms each of tool load by hand on spindle,both programms running with no problem.
    can you please help?

  3. #3
    Join Date
    Nov 2020
    Posts
    13

    Re: AFTER THE TOOLCHANGE THE SPINDLE STOPS

    Do u have ATC STOP menu ON?

    Before T001T0M6, Add M5, and M19, at seperate blocks.
    Btw, when it stops, does the cycle start button is ON?

  4. #4
    Join Date
    Dec 2014
    Posts
    3

    Re: AFTER THE TOOLCHANGE THE SPINDLE STOPS

    Hi yes the cycle start button is on

  5. #5
    Join Date
    Feb 2021
    Posts
    10

    Re: AFTER THE TOOLCHANGE THE SPINDLE STOPS

    Take the program and delete it from memory. Rewrite and reload through data io . Do you have something funky in the tool data? Does this machine have a probe? Make sure it is not sending faulty signals . I have seen this plenty on 640 and matrix , I can not explain it but erasing , rewriting , uploading again seems to solve the issue.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •