Hi, in our M2521 TCP port failed. I have to use Com-port RS-232.
I have drawn up a connection scheme and manufactured the cable.
But Multicam 3000 does not connect to PC.
?an you give a scheme of the cable and settings RS-232 for PC?
Hi, in our M2521 TCP port failed. I have to use Com-port RS-232.
I have drawn up a connection scheme and manufactured the cable.
But Multicam 3000 does not connect to PC.
?an you give a scheme of the cable and settings RS-232 for PC?
Not sure about the MC 3000 but the older MC's that used a Serial cable for connection to the computer, and used WinDNC (Win98) or MX32 to transfer files. If i'm not mistaken a DB-9 Null Modem cable is needed..
The problem is solved. I added CTS wire in the cable to the eight pin. I used 'Motion Connection' and 'Job Server' programs.