584,837 active members*
5,307 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Oct 2019
    Posts
    1

    P232 No program no

    Good morning when I want to make a tool change, I get this alarm, the machine I just bought has a Meldas M3 controller, someone who can help me

  2. #2
    Join Date
    Feb 2012
    Posts
    9

    Re: P232 No program no

    Did you find a solution? I have a similar issue


    Sent from my SM-N985F using Tapatalk

  3. #3
    Join Date
    Jan 2022
    Posts
    3

    Re: P232 No program no

    Day late and a dollar short. Had this problem as well. Macro call was for a program number and should instead be set to 0. This calls the internal M6 command. I thinks it's either 7003 or 7103. Check for it.

  4. #4
    Join Date
    Nov 2012
    Posts
    361

    Re: P232 No program no

    Quote Originally Posted by Buzzman3706 View Post
    Day late and a dollar short. Had this problem as well. Macro call was for a program number and should instead be set to 0. This calls the internal M6 command. I thinks it's either 7003 or 7103. Check for it.
    Full disclosure: Not an expert!

    Tool change operations come in different flavors. I know that on my particular machine (Dyna DM4400m using an M3 control), the tool changer is actually has its own independent sub-system, including its own CPU. The interface between the M3 and that subsystem is via a TC program (in this case, 9000). If you don't have the program in there, the TC will *never* work. On other machines (also from Dyna) there is no separate sub-system. I haven't had the opportunity to look at these machines in person, but my sense is that the TC is built into the PLC. The point to all this is that I am wondering if you are missing a TC program. This would not be uncommon for a machine that has been sitting for a long time so the battery died; that would corrupt/erase the memory....

    Note: I'm using the term macro and program as kind of the same thing, which is probably incorrect.

Similar Threads

  1. program of tab program in mori sv 400 and program tool chance
    By hmtam1311 in forum Mori Seiki Mills
    Replies: 0
    Last Post: 12-10-2017, 02:54 PM
  2. Replies: 1
    Last Post: 02-11-2015, 02:38 AM
  3. P232 No Program No. (error)
    By koonta in forum OKK
    Replies: 1
    Last Post: 04-30-2013, 07:44 PM
  4. Replies: 4
    Last Post: 03-06-2013, 07:56 PM
  5. Replies: 0
    Last Post: 12-27-2010, 09:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •