Dear sirs
We work with sqt 250 Mazak Lathe and also have gildemeister lathe.
But what seems to be a big time consumption is pick up speed for part from main spindel to second spindel.
I was wondering if it´s possible to speed up 2 nd spindel pick up.
Thankls and keep up the good work guys.
Thread: Quicker 2 spindel
Results 1 to 3 of 3
-
08-04-2007, 11:49 AM #1
Registered
- Join Date
- Apr 2007
- Posts
- 2
Quicker 2 spindel
-
08-13-2007, 10:34 PM #2
Registered
- Join Date
- Feb 2006
- Posts
- 6
response to you question!
i was told in mazak school that there is only one speed for transfer rate.where are you located?
-
08-18-2007, 01:05 AM #3
Registered
- Join Date
- Nov 2006
- Posts
- 19
Yes you can!
At the shop i work at we had to slow it down because we could not run the machine above a rapid of 2 or the slide cover would come apart. So we slowed the transfer down so that we could run the rapid higher. I cant remember exactly how we did it but i will try to figure it out and get back to you ASAP
Reply With Quote
Posting Permissions
