On a conventional stepper motor driver, the micro-step mode is set by dip switches according to the table.
1. Where are microstep settings in Kstep?
2. How to do auto-tuning microsteps in Kstep?
On a conventional stepper motor driver, the micro-step mode is set by dip switches according to the table.
1. Where are microstep settings in Kstep?
2. How to do auto-tuning microsteps in Kstep?
KStep is fixed at 16 microsteps per full step.
I'm not sure what autotuning of mictosteps would be.
TK
http://dynomotion.com