584,874 active members*
5,473 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Alphacam > slopping pockets
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2011
    Posts
    2

    slopping pockets

    using alphacam v5 looking for information for slopping in a pocket to make either a spoon shape or bowl shape or any other ideas on how to achieve this.
    thank you for any help

  2. #2
    Join Date
    Oct 2013
    Posts
    109

    Re: slopping pockets

    I'm not sure what was available in v5, Its from 2005.
    Have you looked in to the 3D surface options?
    Attachment 456812

    I would recoment using some dedicated CAD software and then importing to Alphacam. Alphacam is developed for CAM rather than CAD.

Similar Threads

  1. Arc Slo Down In Pockets
    By jrmach in forum BobCad-Cam
    Replies: 6
    Last Post: 11-12-2012, 04:01 PM
  2. Cad Pockets
    By Fortwilderness in forum Uncategorised CAD Discussion
    Replies: 2
    Last Post: 02-20-2012, 06:07 PM
  3. Cutting pockets
    By carvemylog in forum Uncategorised CAM Discussion
    Replies: 3
    Last Post: 08-05-2009, 03:54 PM
  4. Pockets and Islands -
    By 2Bits in forum Dolphin CAD/CAM
    Replies: 41
    Last Post: 04-24-2009, 03:35 AM
  5. pockets
    By raymond1 in forum Haas Visual Quick Code
    Replies: 8
    Last Post: 05-20-2007, 12:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •