Hello everyone. Tell me, who knows how to rotate a circular saw 90 degrees? Now it is on the Y axis, but it should be on the X axis. Thanks.
Hello everyone. Tell me, who knows how to rotate a circular saw 90 degrees? Now it is on the Y axis, but it should be on the X axis. Thanks.
When starting the program, the saw turns approximately 45 degrees and stops. PLC80 = TOOL OUT OF POSITION
Is there a proximity sensor detecting it's position? If so, it may be bad or broken.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Hello, it may be a faulty limit switch or a cable connecting to the limit switch.