584,858 active members*
4,307 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Machines > Haas Mills > Haas VF-OE -- I/O PCB -- where do these connectors go???
Results 1 to 3 of 3
  1. #1

    Haas VF-OE -- I/O PCB -- where do these connectors go???

    Hi,

    Please see the hi-res photo here: objectivelyspoken.com/uploads/20210124_142711.jpg

    This is a machine just delivered to my garage that I have yet to power up.

    Before the machine was moved, the technician removed the Regen Resistor Box at the top of cabinet. This means he disconnected the regen cables. I have now connected the regen resister cable, and the regen overheat connector on P20 (above P15 on the left). According to the Mitsubishi spindle drive instructions the Regen Resister connects to P and PR so this seems where it should go.

    Now I have noticed there are four 3-pin male connectors on the right side of the IOPCB that are bare:

    They are P57, P58, P5(110), and P54(350).

    There are also 5 female connectors hanging loose. (You can see them hanging on the right just in the shot.)

    Er...did the technician remove these to get the Regen cable loose?

    Must I plug them back in?

    Does anyone have a shot of their cabinet they can email me showing what is plugged in and what is not.

    This is a 1996 model. I don't yet have three phase power installed.

    Thanks

    Paul

  2. #2
    Join Date
    Aug 2005
    Posts
    114

    Re: Haas VF-OE -- I/O PCB -- where do these connectors go???

    Paul,
    Ask this question in the HAAS forum section on Practical Machinist website. There is a larger group of Haas owner operators there to help.
    JW

  3. #3

    Re: Haas VF-OE -- I/O PCB -- where do these connectors go???

    Quote Originally Posted by jxdxwx View Post
    Paul,
    Ask this question in the HAAS forum section on Practical Machinist website. There is a larger group of Haas owner operators there to help.
    JW
    thanks!

Similar Threads

  1. What connectors do you use?
    By Fortdick in forum Benchtop Machines
    Replies: 30
    Last Post: 09-06-2015, 06:25 PM
  2. 6 pin connectors
    By steeltoes in forum Want To Buy...Need help!
    Replies: 6
    Last Post: 07-11-2011, 05:48 AM
  3. Haas Cable Assembly Connectors
    By Mr. Technical in forum Haas Mills
    Replies: 2
    Last Post: 06-03-2010, 09:14 PM
  4. Connectors
    By LaserImage in forum CNC Machine Related Electronics
    Replies: 6
    Last Post: 07-10-2008, 06:53 PM
  5. DB-25 Connectors
    By Nmbmxer in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 10-17-2005, 01:05 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •