549,871 active members*
2,506 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1

    Join Date
    Feb 2020
    Posts
    4

    GRBL post-processor for plasma

    Hi, I'm just getting my feet wet with Fusion 360 and GRBL as I build my CNC plasma table.
    I drew up a simple shape and did the CAM work in Fusion360. I picked the stock plasma cutter in Fusion360 and the simulation worked fine.
    When I went to post process the CAM into the GRBL laser cutter/plasma cutter post processor, I got an error saying "The CNC doesn't support the required tool/process. Only laser cutting is supported"
    I switched the tool to the laser cutter, re-checked everything and it posts just fine.
    I checked the Autodesk CAM updates and it's the most current version of the GRBL post processor.
    I'm a bit stumped about what's wrong.
    I hope that I can get a bit of guidance here...

  2. #2

    Join Date
    Feb 2020
    Posts
    4

    Re: GRBL post-processor for plasma

    I solved the problem.
    There were setup conflicts.

  3. #3

    Re: GRBL post-processor for plasma

    Quote Originally Posted by DavidR8 View Post
    I solved the problem.
    There were setup conflicts.
    Hi. What was the setup issue? I have the same problem..

  4. #4

    Join Date
    Feb 2020
    Posts
    4

    Re: GRBL post-processor for plasma

    Quote Originally Posted by hypermagic View Post
    Hi. What was the setup issue? I have the same problem..
    I honestly wish I could remember what I did. Sorry!

Similar Threads

  1. SolidCam for SW Post Processor GRBL
    By lestrahl in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 1
    Last Post: 06-08-2020, 08:19 AM
  2. GRBL post processor
    By thehomefoundry in forum SprutCAM
    Replies: 0
    Last Post: 06-05-2020, 05:43 PM
  3. GRBL Post Processor
    By error0xc00000e in forum PowerMILL
    Replies: 0
    Last Post: 05-08-2020, 08:18 PM
  4. Post processor for grbl
    By kermit582 in forum SheetCam
    Replies: 2
    Last Post: 09-30-2017, 01:40 PM
  5. Post processor for Grbl?
    By mjnewsum in forum Surfcam
    Replies: 0
    Last Post: 08-03-2017, 07:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •