[kstrauss]

It looks great! Will you be making further details available?

[Yaryk]

This is just a prototype. What other functions do you need in the remote control?

[kstrauss]

I don't have a SlantPro so my interest is a pendant for my 770-3. I'm just looking for ideas particularly with regard to the software that interfaces the pendant to PP.

[Yaryk]

The brand of the machine does not matter. The console will work on any PP machine. You just need to make changes to the code. The remote works via the add-on hidcomp - EMC/LinuxCNC USB HID interface component

[Yaryk]

I connected a 7-inch screen to the remote control. Work in progress.

https://youtu.be/gYn8LUljJcI

[Yaryk]

My CNC mill little MPG Pendant Pathpilot for the most necessary functions.
1.Axis Zero.
2.Axis SELECT (X Y Z A)
3.Coolant (ON / OFF)
4.5-MODE SELECT (CONT, 0.001, 0.01.0.1, 1.0)
5.Program Start / Resume
6.Program PAUSE.
7.Mpg / Encoder 100PPR
8.Program Stop.
9.4-Mode SELECT (Override) (Feedhold, Maxvelocity, RPM, JOG)
10. Reset.
Works with standard screen resolution 1024x768. Does not require connection via HAL. (There is variate and via Hal. The second system sees as GamePad.) Works on the Pathpilot 1.xxx and 2.xxx versions.

https://youtu.be/Abv31uO3qfA

[sagreen]

My CNC mill little MPG Pendant Pathpilot for the most necessary functions.
1.Axis Zero.
2.Axis SELECT (X Y Z A)
3.Coolant (ON / OFF)
4.5-MODE SELECT (CONT, 0.001, 0.01.0.1, 1.0)
5.Program Start / Resume
6.Program PAUSE.
7.Mpg / Encoder 100PPR
8.Program Stop.
9.4-Mode SELECT (Override) (Feedhold, Maxvelocity, RPM, JOG)
10. Reset.
Works with standard screen resolution 1024x768. Does not require connection via HAL. (There is variate and via Hal. The second system sees as GamePad.) Works on the Pathpilot 1.xxx and 2.xxx versions.

https://youtu.be/Abv31uO3qfA

Looks great! good job...

Can you provide details on how you implemented this in the pathpilot config? Files maybe?

Thanks,
Scott...