Hot August Nights Reno NV, August 5th to the 12th not a cnc show, lots of parts are cnc made mine are not. I hope I am not in the wrong category, if so reprimand me but don't kick me out thanks. I have made the knobs for Hi End hot rods, going to take them to the swap meet on the 9th to the 11th, if there is some demand for them I am going to need a cnc lathe that will take 1" stock ,turn 3"x 4" or more with a tail stock, could use one that does not hold close tolerances any more, these are all made by hand on a 14x40 out of bronze nickel silver 6061 aluminum brass stablized wood micarta amber & mother of purle, some are hand engraved.
Thread: Shift knobs
Results 1 to 3 of 3
-
08-06-2007, 04:14 AM #1
Registered
- Join Date
- Jan 2007
- Posts
- 17
Shift knobs
-
08-11-2007, 05:25 AM #2
Moderator
- Join Date
- Jan 2006
- Posts
- 4396
These are very nice Knobs. Have you checked with any Used CNC Machine Tool Dealers???
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com
-
08-12-2007, 01:34 PM #3
Registered
- Join Date
- Mar 2004
- Posts
- 576
Very nice! You should check out the Turkey Rod Run on Thanksgiving weekend in Daytona. HUGE show (IIRC the largest hot-rod show & swap meet in the US).
Reply With Quote
Similar Threads
-
Grid Shift
By scuba in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 06-27-2013, 02:10 PM -
Automatic work shift on lathe, is it possible?
By DonutSlayer in forum G-Code ProgramingReplies: 28Last Post: 05-28-2007, 05:48 PM -
Datum Shift with TNC530
By Bubbles in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 07-20-2006, 11:23 PM -
offset shift and part off
By nitemare in forum Daewoo/DoosanReplies: 1Last Post: 03-04-2006, 04:49 AM -
Anyone need help on 3rd shift??
By AMCjeepCJ in forum MilltronicsReplies: 0Last Post: 12-22-2005, 08:34 AM
Posting Permissions
