584,830 active members*
5,930 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > PlanetCNC > TNGv2 2020.11.24 and later - can't open gcode with custom scripts
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2017
    Posts
    143

    TNGv2 2020.11.24 and later - can't open gcode with custom scripts

    I run TNGv2 with some heavily customised scripts to control my spindle and cooling. Due to recovering from surgery I haven't been able to use my CNC, today after updating to 2020.12.08 I am now unable to open ANY gcode file. I reverted to 2020.11.24 and have the same problem. Going back to 2020.10.16 it all works again. Note that there have been no changes to my profile. The error I get when trying to open gcode is this:



    I will email my zipped profile through to the support email address so that you can look into it.

    Cheers
    Simon

  2. #2
    Join Date
    Mar 2017
    Posts
    1295

    Re: TNGv2 2020.11.24 and later - can't open gcode with custom scripts

    This is uppercase/lowercase issue. It is resolved in latest version and theRat confirmed that it works now.

  3. #3
    Join Date
    Jun 2017
    Posts
    143

    Re: TNGv2 2020.11.24 and later - can't open gcode with custom scripts

    Many thanks to Andrej for a quick resolution to my problem. Just for completeness for anyone coming across this later, the fix was made in 2021.02.12.

Similar Threads

  1. [TNGv2] - 2021-10-08
    By PlanetCNC in forum PlanetCNC
    Replies: 5
    Last Post: 10-11-2021, 08:17 PM
  2. TNGv2 2020.05.26
    By tantemay in forum PlanetCNC
    Replies: 3
    Last Post: 06-08-2020, 09:33 AM
  3. [TNGv2] Homing not working with 2020.03.12
    By theRat in forum PlanetCNC
    Replies: 2
    Last Post: 03-13-2020, 01:23 PM
  4. Replies: 10
    Last Post: 01-22-2020, 01:26 AM
  5. My own CNC machine, I want to open source the creation scripts and machine
    By tonydiethelm in forum Open Source CNC Machine Designs
    Replies: 1
    Last Post: 06-06-2013, 04:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •